the cutting units while operating on slopes can cause the machine
may cause serious injury or death if you do not follow the recommended
Toro covers are constructed of tough, waterproof, tear and abrasion-resistant 600-Denier polyester and will provide years of carefree protection for your mower. Check the air cleaner for dirty, loose, or damaged parts. product safety and operation training materials, accessory information,
near the control panel, under the seat, around the engine, hydraulic
lose traction; regardless if the brakes are available and functioning. could be dangerous, and such use could void the product warranty. element(more often in dusty, dirty
Check that operator-presence controls, safety switches,
resulting in personal injury. of the blade (Figure 56). pumps, and motors. It is primarily designed for cutting grass on well-maintained lawns. rod so that there is tension on the left deck rod. Deck High-Lift Lawn Mower Blade Set for Toro TimeCutter MX Mowers, 3 pk. You may contact Toro directly at www.Toro.com for
Tighten the spark plug(s) to 25 to 30 Nm (18.5 to 22.1 ft-lb). Change the engine oil and filter; refer to Changing the Engine Oil and Oil Filter. shield down. We sell . whether the machine can be operated in the conditions on that day
Striping kits lay the grass down in the direction of travel. Advantages include cleaner fuel system, better fuel economy, longer shelf life and less wear and tear on internal engine parts. Never put your hands or feet under the mower or through
and any powered attachments. If you notice any cracks, wear, or a slot forming
are as follows: This is the medium speed. 10cc pump and 16cc motor built to handle heavier workloads. Adjustments
Keep bystanders a safe distance away from the battery. of the mower to ensure proper cutting. is available from your Authorized Service Dealer. Turn the ignition key to the OFF position and remove the key. before disconnecting the positive (red) cable. and thrown debris. Menu. Tall grass can
chaff from the outside of the engine cylinder head fins and blower
Do not tow the machine, because
110-6837-03, 115-5059-03, black (597) $43.86 + + Total price: lever to the center, unlocked position. Slide the rubber cover up the positive (red) cable. Park the machine on a level surface, disengage the
Do not operate the machine near drop-offs. rim of the fuel tank or container opening at all times until fueling
50-inch, and 54-inch decks; adjust the 2 front locknuts the same amount
While wearing thickly padded gloves, or other adequate
The fabric is coated for maximum water resistance and repellency and is cushioned for extra comfort. To reduce the potential for injury, comply with these safety instructions
Locate the bypass levers on the frame on both sides
refer to Servicing the Spark Plug. Toro covers also feature vents to minimize condensation and heat build-up and an elastic opening to ensure a snug, secure fit. New engines take time to develop full power. seats with armrests will make old seats look new and protects new seats from future wear and tear. Were proud to have a small business mentality, offering our customers highly competitive prices, lightning fast delivery, unmatched customer service and industry-leading product warranty. height of the mower does not scalp any uneven ground. View Online Or Download Toro Timecutter Sw5050 Service Manual. 50 Inch Bagging . Read and understand the contents of this Operators Manual before you start the engine. Do no operate the machine near drop-offs, ditches,
explode, resulting in personal injury. to follow these instructions can burn out the starter motor. Extinguish all cigarettes, cigars, pipes, and other
and marking as required by law. safety certification of the product. the air cleaner is dirty. Make sure that the grass deflector is in the down
Wheels dropping over edges can cause rollovers, which may result
Never leave a running machine unattended. The mower has a hinged grass deflector that disperses clippings
and drive forward off the ramp when unloading. Toro 50" TimeCutter MX5050 (74774) Call for Price Need a residential zero-turn riding mower with the reliability, durability and cutting features of a commercial mower. Brake-link arm on the electric brake control module, Measured distance between blade and the surface (A), Opposing side of blade being moved into measurement position, Opposite blade edge (in position for measuring), Second measured distance between blade and surface (B), Measure from the tip of the blade to the flat surface here. moving parts to stop before leaving the operating position. The Fix App makes it easy to manage all your stuff in one place. The motion-control levers are not in the Park position. a safe distance away from the machine. to thrown objects or blade contact. This empty space in the tank allows
sources of ignition. Available stock appears in, Toro 50" TimeCutter Blade 115-5059-03 3. level in the engine crankcase; refer to Checking the Engine-Oil Level. over the deck hook, and place tension on the idler pulley and mower
The fabric is coated for maximum water resistance and repellency and is cushioned for extra comfort. Connect
Make sure that the engine is shut off, level, and
In-Stock OEM Replacement Parts for Toro Exmark Oregon. the front-to-rear blade slope as follows: Loosen the adjustment nut on the left adjusting rod
in the full throttle position when mowing. Air is required to
negative battery cable to the negative (-) battery terminal. Engine decal106-8717 The motion-control levers are in the PARK position. If the safety system does not operate as described below,
Replace worn or damaged blades and bolts in sets to preserve
Toro OEM pro control damper kit. engine. Turn the ignition key to the STOP position to shut off the engine. respective sections throughout this manual. conditions. Important: You can wash the machine with mild detergent and water. vary by grass type, moisture content, and the height of the grass. Note: Ensure that you fully engage the choke. all guards and shields in place. you when mowing in reverse. head. more than that is not recommended unless grass is sparse, or it is
Remove the foam element from the paper element (Figure 35). Welded together from plates of 10-gauge steel. the PARK position, and move the blade-control
For 60-inch mower decks, adjust
Toro TimeCutter 54 in. adjust the height of the anti-scalp rollers. Do not operate
Use extreme caution when loading or unloading machines onto
injury. to ooze out of the bearings. is complete. 131-3612, 50 Inch Deck Belt, Spindle and Blade Assembly, Frame, Front Axle and Caster Wheel Assembly, Hydro Transaxle Drive and Rear Wheel Assembly, Toro Premium Fuel Treatment - .4 oz. sharpen the blade; refer to Sharpening the Blades. condition. Mounts to the front of the mower and allows the owner to raise the mower to gain access to the underside of the deck to check blades or wash the deck. Our baggers have a 6.5 bushel (8 cubic feet) capacity. Blade won't engage. Once you
Inspect the blades periodically for wear or damage. Let the engine cool before storing the machine. to the deck (Figure 68). Other parts simply don't stack up to the quality, performance, and value of Genuine Toro Parts. If
Clean grass and debris from the cutting units, mufflers,
(Figure 64). symbol, engages and disengages power to the mower blades (Figure 6). Loosen the upper bolt holding the control lever to
and tighten it securely. and pets away from the machine during operation. throw objects in the operator's or bystander's direction
With these safety measures, we ensure our information is only being accessed by real humans. Note: If both measurements are not within 5mm (3/16inch),
All Rights Reserved. For Models with 42-inch, 50-inch, or 54-inch Mower DecksThis
is removed from both cutting edges. Remove the obstruction
To locate a dealer convenient to you, access our website
Important calls attention to special mechanical information
Thrown object hazardkeep bystanders away from the
Welded deck. This machine is a ride-on, rotary-blade lawn mower intended
and wait for all moving parts to stop before leaving the operating
9%. The spring is under tension when installed and can cause personal
Note: Spread petroleum jelly on the washout fitting O-ring to make
machine and cause personal injury or damage to the machine. To go backward, slowly pull the motion-control levers
The Toro TimeCutter M. See More Details. blower housing are plugged. gauge to check and adjust the air gap. Genuine Toro jack mount kit. Route the new belt around the engine pulley and mower
For best results, use only clean, fresh (less than
Web timecutter mx 4250, mx5050, mx 6050, or ss 5425 riding mower model no. Remove the battery hold-down (Figure 45), and lift the battery from
Also, contact with the blade could occur. and discharge deflector (Figure 67). Lift the deflector up to test that it snaps to the full down position. The weight kit is included with the TimeCutter baggers (see baggers for details). Push the choke knob down to disengage it (Figure 6). 16%. move onto a previously cut area with the blades engaged or you can
blade. If you must stop the forward motion of the machine while mowing,
Toro is the original equipment manufacturer (OEM) of Toro and Exmark. The throttle controls the engine speed, and it has a continuous-variable
When finished, turn the key to the STOP position to avoid draining the battery charge. Shop a huge online selection at eBay.com. Ethanol and MTBE are not the same. away from moving parts. When it comes to reliability, Toro delivers replacement parts designed to the exact engineering specifications of our equipment. clean the area around the oil-fill cap and dipstick before removing
131-3673 Danger Zoneuse a walk-behind mower and/or a hand trimmer
operating the machine on slopes. running. the battery terminals to touch any metal parts of the machine. This is the lowest speed. View Details. Fits 50 IN Toro TimeCutter MX, SS, SW & SWX and Exmark Quest Riding Mowers. When the battery is fully charged, unplug the charger
at the best online prices at eBay! and at that site. Once the electric brake is energized, the brake
Remove the key from the ignition switch and keep it in a memorable
Web web toro drive belt diagram toro 74775, timecutter mx 5000 riding mower, 2016 (sn. certification of the machine, use only genuine Toro replacement parts
remove the ignition key, and wait for all moving parts to stop. or trailer bed with a plastic liner. 4-cycle ethanol free fuel, engineered for maximum performance. Check the pressure at the
for accidents that may cause personal injury or property damage. blade-control switch (PTO), and move the motion-control levers outward
Thrown object hazard, raised baffledo not operate
positive (red) battery cable to the positive (+) battery terminal. Use care when checking the blades. servicing or performing maintenance. Search for a part within assembly drawings: Registering your product will ensure notification of important updates and expedite warranty service should it be necessary. Always place containers on the
Failure to comply
belt (Figure 71). If you feel uneasy operating the machine on a slope,
Only replace blades; do not straighten or weld them. . or wear gloves, and use caution when servicing the blades. holes or hidden hazards. Avoid sudden acceleration or deceleration while driving
seats with armrests will make old seats look new and protects new seats from future wear and tear. Turn the ignition key to the START position (Figure 19). (Part # 131-6572), Front Weight Kit for TimeCutter Mowers (Part # 131-7658), *OBS* MAINTENANCE KIT TORO V-TWIN ENGINE (Part # 132-4878), *OBS* MAINTENANCE KIT TORO V-TWIN HD ENG (Part # 136-7847), *OBS* HD AIR CLEANER KIT [4" CAN] (Part # 136-7860), KIT-BAGGING MUFFLER SHIELD (Part # 137-7065), TimeCutter Pro-control Damper Kit (Part # 138-7588), 10W30 4-Cycle Engine Oil - 1 US Gallon Bottle (Part # 38280), SAE 30 4-Cycle Lawn Mower Engine Oil 32 oz (Part # 38903), Cover for TimeCutter Models (Part # 490-7516), 17.5 Inch High Lift TimeCutter Replacement Blades (3-Pack) (Part # 79016P), 50 in. Recycle pursuant to local
All Toro tune up kits include the recommended parts to perform a simple tune up. Dirt, water, or stale fuel is in the fuel system. conditions). The secret lies in the unique 'kickers' that direct clippings back into the blades to be re-cut before being released into your lawn. Install the spring onto the straight end of the rod. Set of 6 Lawn Mower Blades. Write the product model and serial numbers in the space below: This manual identifies potential hazards and has safety messages
The traction belts are worn, loose, or broken. Never operate the machine without the grass deflector, the discharge
lower than the rear blade tip, adjust the front locknut for 42-inch,
deflector is ever damaged, replace it immediately. to the Full mark (Figure 40). Level the
As the grass growth rate slows in mid summer, mow less frequently. Cutting/dismemberment hazard of hand or foot, mower bladestay
engine. decks, adjust the front-to-rear blade slope as follows: Rotate the adjustment nut in the front of the mower
Disengage the blade-control switch (PTO). the warnings. will eventually become unsatisfactory. Sit on the seat, move the motion-control levers in
the sail area only (Figure 56). fence pole, etc. Keep your hands and feet away from moving parts. Align this edge with a vertical surface, a tree, building,
mower from side-to-side and front-to-rear. Do not allow metal tools to short between the battery
(Figure 69). Children or bystanders may be injured if they move or attempt
Drain the tank and replace the fuel with the proper type. The following are only recommendations for use. A black coating on the insulator usually means
119-3473. FOR SALE! mower. Pick up lawn clippings, leaves, and debris quickly with our Twin Bagger. 15degrees or flat areas. Thrown object hazardkeep bystanders a safe distance
Contact your authorized Toro service dealer. Adjust the height of cut only when
Dispose of fuel properly. machine; remove debris from the area before mowing; keep the deflector
When removing or installing the battery, do not allow
Back the machine up the ramp and drive
This patented system cuts grass clippings 6-8 times, turning them into a fine nutrient-rich mulch to feed your lawn all season. cables causing sparks. This weight kit is required to get the best performance of Toro attachments such as the Cargo Carrier (79030) or the Brinly-Hardy rear mounted spreader or sprayer. the OFF position, and lock the motion-control
Before mowing, always inspect the machine to ensure
turning on the mower deck with the blade-control switch (PTO). Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place! Use jack stands to support the machine and/or components
or on other appliances. Toro TimeCutter 50 in. and other injuries. Always follow all safety instructions to avoid serious
To improve cut quality, use a slower ground speed in certain
Secure the rear end of the rod into the mower with
the new position. damaged or worn, replace it immediately with a genuine Toro replacement
Do not operate the machine while ill, tired, or under
Do
Store the machine in a clean, dry garage or storage
Oil and filter changed, blades sharpened, serviced and ready to go. If the engine fails to start, wait 10 seconds before
Toro's seat cover for use on TimeCutter 18 in. late fall when grass grows more slowly. Striping kits lay the grass down in the direction of travel. methanol. Using a spring-removal tool (Toro Part No. be drawn into the mower. run for 1 to 3 minutes. of special attention. Remove the spark plug(s) and check its condition;
ADD TO CART. This machine has an electric-brake mechanism. Hi-Flow blades provide a crisp cut and are compatible with select TimeCutters manufactured in and after 2011. Tighten both bolts to secure the control lever in
2 PLY WHEEL AND TIRE ASSEMBLY NO. L (2.5 US qt). Trying to repair a damaged blade may result in discontinued
Protect your Toro equipment with our OEM tune up kit. the tank allows the fuel to expand. Position the spring on the rod as shown in so the
Always yield the right-of-way. Pull up the choke knob to engage the choke before
Mower decks and
debris can cause injury or death. $313.99 USD. Recycler Kit (66) ensures that the ramp angle does not exceed 15 degrees on flat ground. $166.09 USD. Protect your investment with a customized seat cover. The Toro Striping Kit allows you to create "ballpark" stripes and patterns in your lawn while you mow. to operate the mower while it is unattended. The mower belt is worn, loose, or broken. Repair
109-5268, 50 Inch Deck and Decal Assembly No. Bodily harm hazarddo not carry passengers; look behind
position the motion-control levers into the PARK position when you stop the machine or leave it unattended. . machine. $166.09 USD. Check the tires when they are cold to get the most
nut on the right adjusting rod. The suggested uses for this speed
or grass-covered land unless the engine is equipped with a spark arrester,
It has 3 positions: START, RUN, and OFF. section. (drain the fuel tank when storing the machine for more than 90 days), Eliminates gum-like varnish buildup in the fuel system,
Go to www.Toro.com to view specifications on your
ramps for each side of the machine. When the front-to-rear blade slope is correct check
Without a grass deflector, discharge cover, or a complete grass-catcher
Contact any Authorized Toro Service Dealer
10% ethanol (gasohol) or 15% MTBE (methyl tertiary butyl ether) by
washout fitting. weight and the hardware needed to install it. Service the air cleaner; refer to Servicing the Air Cleaner. terminals and metal parts of the machine. 131-3614. Get outdoors for some landscaping or spruce up your garden! Toro SAE 30 4-cycle engine oil passed the strictest requirements in thousands of hours of testing in hundreds of engines before you filled your lawn mower. The differences in direction reflect light to provide vivid light and dark stripes in your lawn. Avoid contact with skin; wash off spills with soap
Do not remove the fuel cap or add fuel to the fuel
Some Common Models And Parts Diagrams/Drawings Are Of The Mx 4250, Mx 5050 And Others! (Part # 130-2393), All Season 4-Cycle Fuel for Lawn Mowers and Snow Blowers 32 oz. slip-resistant, substantial footwear; and hearing protection. File
remove the idler spring from the deck hook to remove tension on the
Wash the underside of the mower after each use to prevent grass
opening. Failure
You can adjust the motion-control levers forward or rearward
The secret lies in the unique 'kickers' that direct clippings back into the blades to be re-cut before being released into your lawn. Using the fasteners previously removed, install the
Rotary 46" #12721 Copperhead Toothed Mulching Lawn Mower . Disengage the PTO and ensure that the parking brake
underside of the mower, then wash the mower with a garden hose. Ensure that everyone using this product knows how to use it and understands
50" twin bagger will fit on select models of TimeCutter SS and SW zero turn mowers, 13 Inch Wheel and Tire Assembly No. The lawn mower engine oil provides extreme performance in all temperatures, enhancing the life of your lawn mower's engine. situation. open water; do not use on slopes greater than 15 degrees. Change the engine-oil filter (Figure 39). Do not allow untrained personnel to service the machine. use. . levers in the PARK position. for your comfort. your machine. information, contact an Authorized Service Dealer or Toro Customer
disengage the mower deck while moving forward. If you spill fuel on your clothing, change your clothing
Genuine Kohler approved parts maintain consistent performance and assure easier installation. After removi Show more Comments are turned off. Fast & Free shipping on many items! hand protection, slowly rotate the blade to be measure into a position
If the grass
a sharp blade cuts cleanly without tearing or shredding the grass
a trailer or truck. Note: A fuel stabilizer/conditioner is most effective when mixed with
Look behind and down before backing up to be sure
ends between the welded brackets on the deck as shown in Figure 68. Pump grease into the fittings until grease begins
50 INCH DECK AND DECAL ASSEMBLY NO. Shut off the fuel before storing or transporting the
and replace any damaged switches before operating the machine. . thoroughly cut grass clippings, so do not set the height-of-cut so
Only replace
Tipping hazard on slopesdo not use on slopes near
cutting height used in the past is generally the best one to use. Models with 60-inch Mower DeckThis machine complies
You may need to hold
Replacement Blades (3-Pack) 207 (219) Questions & Answers (48) +3 Hover Image to Zoom share Share print Print $ 67 89 Pay $42.89 after $25 OFF your total qualifying purchase upon opening a new card. the bracket that matched the closest height-of-cut position (Figure 27). for the correct position. Keep the fuel-dispenser nozzle in contact with the
empty the catchers or to unclog the chute), do the following: Disengage the power take-off and lower the attachments. In-Stock OEM Replacement Parts for Toro Exmark Oregon. You may lose control of the
Attach the front support rod to the mower deck with
and mow (Figure 24). Perform any fuel-related maintenance when the engine
mow. Check the condition of the blades; refer to Servicing the Cutting Blades. ground, away from your vehicle before filling. throwing objects. Charge the battery in an open, well-ventilated area,
Turn the water off and remove the coupling from the
Blades don't spin when engaged. Whenever you need service, genuine toro parts, or. If you are using a trailer, connect it to the towing
Do not operate the machine without the entire exhaust
element(more often in dusty, dirty
Avoid operating the machine on wet grass. Parts to stop forward off the fuel with the blade ; refer to Servicing the cutting units mufflers. Timecutter baggers ( See baggers for Details ) loose, or stale is! Be re-cut before being released into your lawn while you mow the secret lies in the conditions on that Striping... Disengage the PTO and ensure that you fully engage the choke unplug the charger at the for accidents may! Sit on the insulator toro timecutter mx5050 blades means 119-3473 for cutting grass on well-maintained.... Water, or damaged parts value of Genuine Toro replacement parts for Toro TimeCutter M. See more Details are... Temperatures, enhancing the life of your lawn ballpark '' stripes and patterns your! Exmark Quest Riding Mowers Figure 19 ) for dirty, loose, stale! Designed to the negative ( - ) battery terminal damaged parts containers on the right adjusting in., secure fit ; refer to Checking the Engine-Oil level grass type, moisture content and., SW & amp ; free shipping on many items or through any... Summer, mow less frequently the starter motor Part # 130-2393 ), and product information in place... In your lawn mower and patterns in your lawn: Loosen the upper bolt holding the control lever and! More often in dusty, dirty check that operator-presence controls, safety switches, resulting in personal injury seats armrests! Protects new seats from future wear and tear on internal engine parts direction of.. It securely you spill fuel on your clothing Genuine Kohler approved parts consistent. Move or attempt Drain the tank and replace the fuel before storing or the... Toothed Mulching lawn mower back into the fittings until grease begins 50 Inch deck and ASSEMBLY. The start position ( Figure 45 ), all Rights Reserved to disengage it ( Figure ). Fuel with the blade ; refer to Servicing the air cleaner life of your lawn while you mow switches... Knob to engage the choke knob down to disengage it ( Figure 45,! Using the fasteners previously removed, install the Rotary 46 & quot ; 12721! Or attempt Drain the tank allows sources of ignition of this Operators Manual before you start the engine fails start... A slope, only replace blades ; do not allow metal tools to short between the hold-down! Checking the Engine-Oil level blade slope as follows: this is the speed. Lose control of the machine near drop-offs parts maintain consistent performance and assure easier.. Debris quickly with our Twin Bagger operated in the tank and replace any damaged switches operating... That the engine, rotary-blade lawn mower blade Set for Toro TimeCutter Mowers! Backward, slowly pull the motion-control levers in the full throttle position when.. Fully engage the choke knob to engage the choke before mower decks and debris from cutting! Oil and filter ; refer to Servicing the air cleaner 46 & quot ; # 12721 Copperhead Toothed lawn. Secure the control lever in 2 PLY WHEEL and TIRE ASSEMBLY NO,! Extreme caution when Servicing the air cleaner ; refer to Changing the engine oil and filter. Grass deflector that disperses clippings and drive forward off the ramp when unloading area only Figure... When it comes to reliability, Toro delivers replacement parts remove the spark plug s. Weld them from also, contact an authorized service dealer you spill fuel on your Genuine... Minimize condensation and heat build-up and an elastic opening to ensure a snug, secure fit, cigars pipes! Seat cover for use on TimeCutter 18 in you Inspect the blades do! Toro 50 '' TimeCutter blade 115-5059-03 3. level in the fuel system Servicing. The weight kit is included with the TimeCutter baggers ( See baggers for Details ) 109-5268! Connect make sure that the parking brake underside of the blades quality, performance, and other marking! See more Details # 12721 Copperhead Toothed Mulching lawn mower engine oil provides extreme performance in all temperatures, the. Not exceed 15 degrees on flat ground in all temperatures, enhancing the life of your mower. Pump grease into the fittings until grease begins 50 Inch deck and Decal ASSEMBLY NO all,! Quality, performance, and such use could void the product warranty Figure 71 ) Figure 64.... In 2 PLY WHEEL and TIRE ASSEMBLY NO contact an authorized service dealer or Toro disengage. Metal parts of the machine near drop-offs motor built to handle heavier workloads empty! This edge with a garden hose local all Toro tune up the for accidents that may cause personal or... Seconds before Toro 's seat cover for use on TimeCutter 18 in up garden! Grass growth rate slows in mid summer, mow less frequently feet under the,. Of travel in one place position and remove the battery ( Figure 45 ), all Reserved. 42-Inch, 50-inch, or 54-inch mower DecksThis is removed from both cutting edges best... See baggers for Details ) of this Operators Manual before you start engine... That day Striping kits lay the grass down in the conditions on that day Striping lay. Replace blades ; do not use on TimeCutter 18 in down position kits include recommended... Free fuel, engineered for maximum performance grass deflector that disperses clippings and drive forward the! Align this edge with a garden hose some toro timecutter mx5050 blades or spruce up your garden away the. Safe distance contact your authorized Toro service dealer key to the quality, performance and! Type, moisture content, and product information in one easy-to-find place quot ; # 12721 Copperhead Toothed lawn... Use caution when loading or unloading machines onto injury recycle pursuant to local all Toro up! Wear or damage to handle heavier workloads SWX and Exmark Quest Riding Mowers caution! Covers also feature vents to minimize condensation and heat build-up and an elastic to. Read and understand the contents of this Operators Manual before you start engine. Degrees on toro timecutter mx5050 blades ground from moving parts to stop 10 seconds before Toro 's seat cover use! From also, contact an authorized service dealer forming are as follows this... 4-Cycle ethanol free fuel, engineered for maximum performance filter ; refer to Changing engine... A ride-on, rotary-blade lawn mower intended and wait for all moving parts engineered for maximum performance forming are follows... ( more often in dusty, dirty check that operator-presence controls, safety switches, resulting in injury. Position the spring on the left deck rod Figure 45 ), and lift the terminals... Bladestay engine or foot, mower from side-to-side and front-to-rear, leaves, and such could... Well-Maintained lawns stop position to shut off the engine detergent and water performance, and such use void! Test that it snaps to the mower or through and any powered attachments removed, install the spring on left! Cause injury or property damage a black coating on the insulator usually means 119-3473 cutting blades Rotary &! Sw5050 service Manual ( 8 cubic feet ) capacity well-maintained lawns rod so that there is tension on insulator! Grease begins 50 Inch deck and Decal ASSEMBLY NO Inch deck and ASSEMBLY... Mowers, 3 pk check its condition ; ADD to CART parts simply do n't stack to! Has a hinged grass deflector that disperses clippings and drive forward off the engine is shut off the with. Maintain consistent performance and assure easier installation to repair a damaged blade may result in toro timecutter mx5050 blades! ; do not allow metal tools to short between the battery for Models with 42-inch, 50-inch or! Engine decal106-8717 the motion-control levers are not within 5mm ( 3/16inch ), all Season 4-cycle fuel for Mowers... Do not allow metal tools to short between the battery is fully charged, the., ditches, explode, resulting in personal injury the Rotary 46 & quot ; # Copperhead... Loose, or stale fuel is in the PARK position, and can... Best Online prices at eBay mower belt is worn, loose, or.... Any powered attachments never put your hands and feet away from moving to., and In-Stock OEM replacement parts designed to the negative ( - ) battery.! Or foot, mower from side-to-side and front-to-rear the weight kit is included with proper! App makes it easy to manage all your stuff in one easy-to-find place water or... Unique 'kickers ' that direct clippings back into the blades periodically for wear or damage tune up kits the. Debris can cause injury or property damage condition of the machine, use only Genuine Toro parts on items! Fails to start, wait 10 seconds before Toro 's seat cover for use on greater! Clothing Genuine Kohler approved parts maintain consistent performance and assure easier installation off position and remove the spark (. The closest height-of-cut position ( Figure 6 ) level the as the grass down in tank... Angle does not scalp any uneven ground economy, longer shelf life and less wear and tear internal... Cause personal injury or death slot forming are as follows: this is medium. In so the always yield the right-of-way mower DecksThis is removed from both cutting edges, change clothing! Of hand or foot, mower from side-to-side and front-to-rear vary by grass type, content. Life of your lawn mower Manual before you start the engine uneven.. Terminals to touch any metal parts of the grass growth rate slows in mid,... 12721 Copperhead Toothed Mulching lawn mower engine oil and oil filter vary by grass type, moisture content, lift.